News

Cam pump is the core product of Borg Company with many patented technologies. Up to now, Borg has 6 series of 16 types of cam pumps with a flow rate of 1200 m3/h and a lift of 140 m, and each type of cam pump can provide different materials and designs to meet the different needs of customers. Principle Bog rotary cam pump is self-priming, valveless, positive displacement pump. The two synchronous rotors rotate clockwise and counterclockwise in parallel to each other, forming the drainage chamber. Fill the conveyed material in the open chamber at the pump inlet. These materials are displaced to the discharge end along the direction of volumetric flow. The displacement is related to the rotational speed and the flow direction is reversible. The occlusion arrangement of the rotors is almost perfect at the stop. Advantage Various pump types can provide suitable solutions for any particular application. All pump models are modular design, pump housing and gear box are integral casting. Thanks to the symmetrical structure design, the conveying direction can be completely reversed only by changing the current direction. Large diameter entrance ensures easy entry of fluid medium with high viscosity, larger or harder solids. The medium transportation in the pump chamber is very short. So the conveying process is very smooth. The Bog pump will not be blocked even when transporting medium containing fibers or small cakes. Only the lining plate, the rotor and the seal of the pump are in contact with the medium being conveyed, and the other parts of the pump, including the shaft, will not be in contact with the medium being conveyed.

The food industry is the largest industry in the world's manufacturing industry. In this long-term industrial chain, the level of modernization of food processing, food safety and food packaging is directly related to the quality of life of the people and is an important indicator of the degree of national development. From raw materials, processing technology, finished products, packaging to final consumption, the entire flow process is complex and varied, and every link is inseparable from the world-class trading platform for quality assurance and information flow. 2019 The 11th Shanghai International Food Machinery and Packaging Technology Exhibition has always focused on the new dynamics of food processing, packaging and machinery industry, providing opportunities for industry players to create value, share knowledge and expertise, and promote new technological innovations. . After nearly a decade of development, the company has gradually formed a theme exhibition to lead the new development trend of food equipment and packaging equipment in the Asia-Pacific region and release the development trend of the industry. Shanghai International Food Processing and Packaging Machinery Exhibition will beneficially promote the transformation and upgrading of the food processing equipment industry, enhance the technological level of the processing industry, lead the industry's packaging innovation and development, and create a leading event in processing and packaging in Asia. 2019 The 11th Shanghai International Food Machinery and Packaging Technology Exhibition will continue to lead the way for innovation. In line with the exhibition's consistent high-end brand positioning and professional quality service, it combines the international leading exhibition experience of the organizing committee and the global communication network and food. Processing and packaging machinery related associations in food packaging, provincial and municipal areas of superior resources and industry appeal, to create a world-class food machinery, processing and packaging equipment and materials information, trading platform, you understand the international and domestic industry The new trend, the first choice for new technology! 2019 Shanghai International Food Machinery and Packaging Technology Exhibition, invites you to visit. With guidance!

There are several maintenance items that must be done for packaging machinery in daily life. They are the cleaning, fastening, adjustment, lubrication and anti-corrosion work of the equipment. In the normal production process, the machine maintainer should: according to the maintenance manual and maintenance procedures of the machine packaging equipment, strictly carry out various maintenance work within the specified period, reduce the wear speed of the parts, eliminate the hidden troubles, and extend the machine. The service life. Mechanical maintenance work includes routine maintenance, regular maintenance and special maintenance. Regular maintenance can be divided into three types: first-grade maintenance, second-level maintenance and three-level maintenance. Special maintenance can be divided into season maintenance and deactivation maintenance. The following article will introduce the specific procedures and precautions for these types of maintenance work. Routine maintenance Routine maintenance focuses on cleaning, lubrication, inspection and tightening, and routine maintenance is required as required during and after the work of the machine. Primary maintenance It is carried out on the basis of routine maintenance. The key work is to lubricate, tighten and inspect all relevant parts and their cleaning work. Secondary maintenance Focus on inspection and adjustment. Specifically check the engine, clutch, transmission, transmission components, steering and brake components. Tertiary maintenance The focus is on detecting, adjusting, troubleshooting, and balancing the wear and tear of each component. Diagnose and condition check the parts that affect the performance of the equipment and the parts with fault signs, and then complete the necessary replacement, adjustment and troubleshooting. Seasonal maintenance It means that the packaging equipment should focus on the power system (engine), the conveying system (spiral shaft and belt conveyor), the air pressure system (check the lubrication and sealing of the air compressor), and the control system before entering the winter and winter. Inspection and repair of electromechanical control cabinets, this part needs to be completed under the guidance of the after-sales engineers.) Inspection and repair of components. Disable maintenance It means that when the packaging equipment needs to be deactivated for a period of time due to seasonal factors (such as winter vacation), it should be clean, cosmetic, supporting, moisture-proof and anti-corrosion work.

EVA is an ethylene-vinyl acetate copolymer referred to as EVA. Compared with polyethylene, EVA reduces the high crystallinity and improves the flexibility, impact resistance and filler compatibility due to the introduction of vinyl acetate monomer in the molecular chain. And heat sealing performance. The EVA midsole refers to the midsole of the shoe that is formed by injecting EVA into the mold and then heated by high temperature. It is also called a foaming midsole. The traditional EVA is hot pressed. The EVA injection machine directly injects the EVA particles into the mold of the machine. After the vacuum is added for about 400 seconds, the mold is opened, the sole of the mold is foamed, and then the hot and cold shaped box is shaped. The big feature is high output, one molding. The disadvantage is that it is easy to deform, and it turns yellow and shrinks over time. How to identify is EVA shoe material: 1. PU bottom, cut a small piece to ignite, the flame is stable without green edges, and there is melting and dripping. 2, PVC bottom, cut a small piece, ignite the flame beat with green edge, self-extinguishing from the fire. 3, EVA bottom, cut a small piece to ignite, there is a burning smell of candles and melting and dripping. 4, the rubber sole, cut a small piece to ignite, there is a burnt smell of the tire, there is black smoke. 5, TPR bottom, cut a small piece, ignite the flame to beat, the burning part is molten, not extinguished from the fire, soluble in a stupid.

Big data, industrial Internet, intelligent manufacturing... The emergence and renewal of new technologies has brought manufacturing into a new field. Many industries stand out in development, and industrial robots are one of them. With the increasing demand for automation in factories, the industrial robot market has been hot in recent years, and it has become a "new vent" in the manufacturing industry. However, this year, the industry that has been riding the wind has begun to expose various problems. The first is that the plug-in is not there. The robotics industry, which has been able to harvest high-yield financing in the past, is facing a situation of weakening investment. The withdrawal of capital will undoubtedly expose some enterprises that rely on the survival of foreign capital to face severe tests. Second is the lack of innovation. Like other manufacturing industries in China, industrial robots are also faced with the dilemma of [imitation and innovation". After several rounds of trials in the market, it is difficult for domestic industrial robots lacking core competitiveness to attract customers by their original selling points. Finally, the core technology is controlled by people. At present, one of the flaws of domestic industrial robots is the lack of mastery of core components. Although a large number of enterprises such as Huazhong CNC and Guangzhou CNC are actively trying to break down technical barriers, it is still difficult to fill shortcomings in a short period of time. Like the industrial robot industry, domestic machine tools are also facing a late start, and core technologies are subject to people and other issues. Innovation, technology, performance, quality, domestic industrial robots need to be strong internal strength is also the focus of the development of the machine tool industry. At present, the opportunities and challenges of the domestic machine tool industry coexist. On the one hand, factors such as insufficient innovation capability, limited technical level, and lack of core component technology have caused domestic machine tools to face greater pressure in the competition. On the other hand, the influx of new technologies such as sensors, industrial Internet, and artificial intelligence has brought more possibilities for the transformation and upgrading of domestic machine tools.

Data from Manzhouli Customs, the largest port in China and Russia, shows that high-tech, high-value-added products such as electronic products and auto parts are becoming the main force for exporting goods to Manchuria Port, accounting for 32% of the beginning of the 2013 China-European class. The current 69%. It is understood that since the opening of the China-Europe team, the goods exported through the Manzhouli Port have gradually changed from light industrial textiles and daily necessities to high-tech, high value-added products such as auto parts, notebook computers and liquid crystal displays. "From the increase and change of the types of goods leaving the country, it can be seen that the recognition of Chinese products by European countries is getting higher and higher, and the demand is getting stronger and stronger." Xu Xuemeng, deputy section chief of the Logistics Monitoring Division of the Manzhouli Customs Station Office. In September 2013, the first column of [Sumanou" Central European trains exited the Manzhouli Port. At present, the number of Central European trains entering and leaving the Manchuria port has reached 50. The main collection sites cover more than 60 cities including the Yangtze River Delta, the Pearl River Delta, and Chongqing and Tianjin. The nearly 100 billion yuan of goods from China are shipped to Russia. More than 30 cities in 12 countries and regions such as Poland and Germany. On the return journey, China Europe and the United States form a fixed return trip source for sheet metal, wine produced in Europe, and grain and oil products. The return empty container rate has been greatly reduced. This year's return shift list has increased by 46% compared with the same period of last year.

1. Need to polish in the early stage However, the galvanized layer of the weld must be polished away, otherwise bubbles, trachoma, and false welding will occur. It also makes the weld brittle and the rigidity decreases. 2. the welding characteristics of galvanized steel Galvanized steel is generally coated with a layer of zinc outside the low carbon steel, and the galvanized layer is generally 20 um thick. Zinc has a melting point of 419 ° C and a boiling point of about 908 ° C. In welding, zinc melts into a liquid that floats on the surface of the bath or at the root of the weld. Zinc has a large solid solubility in iron, zinc liquid will deeply etch the weld metal along the grain boundary, and low melting point zinc forms "liquid metal embrittlement". At the same time, zinc and iron can form intermetallic brittle compounds, and these brittle phases reduce the plasticity of the weld metal and cause cracks under tensile stress. If weld fillet welds, especially fillet welds of T-joints, are most susceptible to penetration cracks. When the galvanized steel is welded, the zinc layer on the surface and the edge of the groove is oxidized, melted and evaporated under the action of arc heat to volatilize white smoke and steam, which easily causes weld pores. 3. Welding process control The pre-weld preparation of galvanized steel is the same as that of ordinary low-carbon steel. It is necessary to pay attention to the groove size and the nearby galvanized layer. For the penetration, the groove size should be appropriate, generally 60~65°, to leave a certain gap, generally 1.5~2.5mm; in order to reduce the penetration of zinc into the weld, the galvanized inside the groove can be welded before welding After the layer is removed, it is soldered again. Welding method: When welding the first layer of welds of multi-layer welding, the zinc layer is melted as much as possible and vaporized and evaporated to escape the weld seam, which can greatly reduce the liquid zinc remaining in the weld. When welding the fillet weld, the zinc layer is also melted as much as possible in the first layer and vaporized and evaporated to escape the weld. The method is to first move the end of the electrode forward about 5~7 mm, when the zinc layer is made. After melting, return to the original position and continue to weld forward. In the case of cross-welding and vertical welding, if short-slag welding rods such as J427 are used, the tendency of undercutting will be small; if the round-trip transportation technology is used, the quality of non-defective welding can be obtained.

Safe green mining and clean and efficient use are the development direction of the world coal industry. As an important basic energy source and raw material for China, coal will not change its main energy status for a long period of time. We must conscientiously do a good job in coal. At present, China's economic and social development is at a new stage of historical development. The state has promoted the overall layout of the "five in one" and coordinated the promotion of the "four comprehensive" strategic layout, vigorously promoted the "energy revolution", and accelerated the pace of transformation and upgrading of the coal industry. The coal production and consumption methods will undergo profound changes, and new and higher requirements will be put forward for the equipment manufacturing industry. The future of coal machinery and equipment manufacturing is bright and promising. China has proposed and is implementing the [One Belt, One Road" development strategy. The [One Belt, One Road" plan emphasizes that it is necessary to increase investment in smart equipment, strengthen the guiding role of economic policies, and promote coal mine enterprises to increase investment in smart equipment; And technology, improve intelligent production conditions, and improve the intelligent production capacity of coal mines. It is predicted that during the [Belt and Road" period, the scale of coal mine and non-coal mine safety and intelligent equipment market is expected to reach more than 10,000 yuan. Many countries along the [Belt and Road" Rich in coal resources and large demand for coal mining technology equipment, the 14th China Beijing International Coal Equipment and Mining Technology Equipment Exhibition will be held in 2018. For China's coal mining technology equipment enterprises to go global, the world's advanced technologies and equipment will be introduced. It has created a rare opportunity to form an import and export trade of coal mining technology equipment with [into and out, big in and big out". It is a smart move for coal mining equipment enterprises to seize this once-in-a-lifetime opportunity. Exhibit range 1. Display of the image and new achievements of large-scale mining groups at home and abroad; display of investment projects in coal cities; display of the latest achievements in the development of coal mine equipment manufacturing; 2. Coal mine production equipment: coal mining machine Electric shovel bracket Scraper conveyor Mining vehicle Pump station Mining metallurgical equipment; 3. Roadway excavation and support: roadway excavation equipment rock drilling equipment roadway support material roadway support equipment (drilling machine and anchor rod, concrete jet machine); 4. Coal mine transportation equipment: underground transportation equipment, transportation equipment spare parts material storage, mining machine, shovel loader, rock loader, loader, scraper

China News Service, Dongguan, October 25 (Li Yingmin, Li Chun) The 18th China (Chang'an) International Machinery Hardware Mould Exhibition opened on the 25th in Chang'an Town, Dongguan City, Guangdong Province. Mechanical hardware mold companies from Germany, Japan, Switzerland and other countries and regions gathered at the exhibition to connect with Dongguan manufacturing enterprises. China (Chang'an) International Machinery Hardware Mould Exhibition is an old-fashioned mechanical hardware mold exhibition sponsored by China Machinery Industry Federation. According to the organizer, the scale of this year has been further expanded. The exhibition has set up temporary special equipment, 750 standard booths and 2000 booths. It is divided into brand special installation area, machine tool and equipment exhibition area, mold and accessories exhibition area, hardware and electrical exhibition area, and electronic Functional areas such as business districts and financial service exhibition areas, including mold products and equipment, CNC machine tool machining centers, precision instruments and equipment, etc. The total exhibition area is over 200,000 square meters. The reporter found at the exhibition that with the transformation and upgrading of Dongguan's manufacturing industry, the demand for high-end mechanical hardware mold equipment is also growing, attracting more and more internationally renowned mechanical hardware mold enterprises to come to the exhibition. In this exhibition, overseas and internationally renowned mechanical hardware mold companies from Japan, Germany, Switzerland and other countries compete to launch the latest products. With the all-round rise of China's mechanical hardware molds, in addition to the internationally renowned mechanical hardware mold enterprises, many Dongguan local mechanical hardware mold enterprises have emerged at the exhibition.

At the closing press conference of the 124th Canton Fair, Xu Bing, deputy secretary-general of the Canton Fair, spokesperson and deputy director of the China Foreign Trade Center, introduced the achievements of the Canton Fair in promoting the high-quality development of foreign trade. Xu Bing said that the current Canton Fair will closely focus on the goal of the Ministry of Commerce to build a strong economic and trade power ahead of time, adhere to the new development concept, comprehensively enhance the level of internationalization, specialization, marketization and informatization, and promote the transformation and upgrading of China's foreign trade and high-quality development. Promote the [Made in China" upgrade to [Created in China", [Chinese Brand" and [China Service". The quality of the exhibition has been comprehensively improved. The current Canton Fair will focus on improving the level of specialization and brand exhibition area, and comprehensively improve the quality of exhibitions; actively respond to Sino-US trade frictions as the core, ensure the diversification, globalization and quality of buyers from sources; For the purpose of exhibiting returns, we provide a wealth of local industry promotion, various trade promotion and matching services; aiming at enhancing the experience of the conference, with wisdom and green Canton Fair as the starting point, comprehensively optimize and enhance the services of the Canton Fair site; The Belt and Road Initiative, the strengthening of intellectual property protection, the promotion of the level of exhibitions and exhibitions, and the level of service are open to the outside world. The pace of high-quality development of enterprises has accelerated. The brand exhibition area, which accounted for 20% of the total number of booths, was worth US$9.45 billion, which was a good deal, accounting for 31.7% of the total turnover. A large number of enterprises continue to exert their strength in technology research and development, product innovation, brand building and market development. High-tech, high-quality, high value-added, green environmental protection and self-owned brand products are active in transactions, and the transaction is better than the overall transaction level.

The Canton Fair has always been regarded as the "barometer" and "wind vane" of China's foreign trade. Since its founding in 1957, especially since the reform and opening up 40 years ago, the Canton Fair has closely focused on the overall reform and opening up of the country and the development strategy of foreign trade and economic cooperation, and has continuously reformed and innovated in various historical periods. From content, form to function, a series of profound changes have taken place, for Chinese enterprises, Chinese products, Chinese brands to go global, to expand exports and promote imports, to promote China to become a major economic and trade country, to promote the building of an economic and trade power and an open world economy. Development has made a positive contribution. The overall pattern and scale of the 124th Canton Fair remained basically stable, and the scale of the exhibition remained basically stable. It will continue to be held in three phases. The total exhibition area is 1.185 million square meters, the total number of booths is 60,645, and there are 25,583 domestic and foreign exhibitors. The first phase will be held from October 15th to 19th. It will mainly display electronics and home appliances, lighting, vehicles and accessories, machinery, hardware tools, building materials, chemicals and energy products. The second phase will be held from October 23 to 27, featuring daily consumer goods, gifts and home decorations. The third phase will be held from October 31st to November 4th. It will mainly display textiles and garments, shoes, office bags and leisure products, medicine and medical care, and food products. Improve the quality of exhibitors The Canton Fair will take the opportunity of brand booth evaluation and optimization of the structure of the exhibition area to carry out the evaluation of the brand booth of the Canton Fair. A total of 2,300 brand enterprises have been selected. Among them, there are a number of old enterprises with stable development and strong strength, and they have absorbed a lot of [fresh blood" and enhanced the demonstration role of brand enterprises. Comprehensively enhance the quality of exhibits in the new theme exhibition area. New enterprises, new energy, pet supplies and outdoor spa facilities accounted for 19.15% of new businesses, and the company's structure is more optimized. Support local special industry exhibitors. In the third phase, the central channel of the A district gathered seven major textile and garment industry clusters to participate, forming a pattern of [local characteristic industrial clusters". Optimize the structure of the exhibition area in all aspects. Expand the exhibition areas of home appliances, kitchens, homes, etc., adjust the location of pet supplies, watches and glasses exhibition area; set up a multi-functional exhibition site activity area in the third phase 7.1, and enhance the effect of the exhibition by the interaction of exhibitions and events; In the special area setting, there are 152 special zones in 41 exhibition areas, and the proportion of exhibition areas in the exhibition area is 82%. Improve the level of exhibitions and exhibitions The current Canton Fair actively utilizes two markets and two resources at home and abroad to enhance the level of exhibitions and exhibitions. Among the overseas exhibitors, 60% of the countries and regions along the [Belt and Road" attracted 7 national pavilions and 3 regional pavilions. Expand the global strategic cooperation network. We will comprehensively strengthen the recruitment of countries and regions along the route, deepen cooperation with the local government trade promotion departments and industrial and commercial organizations, and carry out special promotion together with well-known industrial and commercial organizations along the route of Turkey, Thailand, India and other countries. Attracting quality resources overseas. The first phase focuses on the introduction of industrial products with high-tech and high-end brands. The third phase focuses on the introduction of consumer products with regional characteristics, complementary advantages with domestic products, and strong demand in the import market. Carefully cultivate the theme of the exhibition. Some overseas enterprises in electronics, home appliances, fabrics and home textiles will be arranged adjacent to the same exhibitors in China, and will be exhibited on the same platform to achieve complementary advantages and common development of domestic and foreign products. In the third phase, baby products will be set up and internationalized. Great health area. Improve the effectiveness of trade matching. A number of trade docking events will be held to provide "one-stop" matching services.

Xinhua Net Nanchang November 1st (Zhao Yujiao) was jointly organized by the Propaganda Department of China Railway Corporation and the Propaganda Department of the Party Committee of Nanchang Bureau Group Company, and entrusted the China Railway International Travel Company to organize the [Discover the most beautiful railways and explore the high-speed railway around the lake" activity in October. On the 30th, I came to explore the long track base in Xiangtang. In recent years, China has continuously strengthened the construction of high-speed rail safety, starting from the foundation, winning with technology, and actively exploring new ideas, new mechanisms and effective means to strengthen safety supervision in view of the safety characteristics of high-speed rail. Waiting for welded rails In the Yingtan Public Works section of the China Railway Nanchang Bureau Group Co., Ltd., the phrase "a welding head is equal to a thousand heads" is not an alarmist. Any problem with a welding head may affect a passenger. Safety of life and property. In the work of the long track base of Tangtang, we have been adhering to the safety concept of [welding a rail heart and one car passenger" and meticulous work attitude, uncompromising quality standards, and a state of mind. Self-requirement. It is precisely in the work that these four "one" requirements are always implemented. They will pass a series of processes such as rust removal, welding and grinding after 100 meters of short rails, forming a 500-meter long steel rail. On the high-speed railway lines such as Guangzhou, Beijing-Shanghai, Shanghai-Kunming and Hangzhou-Shenzhen, the company has provided high-quality long-distance tracks for passenger and high-speed railways, and has made positive contributions to the development of China's high-speed railway. At present, about 27,000 kilometers of long rails have been welded to the long track base of Tangtang, which can be connected to the earth for half a circle.

From April 18th to 21st, the 18th China (Jinjiang) International Footwear (Sports Industry) Expo was held in Jinjiang, Fujian. As the world's largest sports shoe production base, Jinjiang has an annual output of 1 billion pairs of sports shoes. About one-sixth of the world's sports shoes are produced in Jinjiang. Jinjiang's strong shoe-making production capacity has spawned a perfect industrial chain. In terms of shoe-making equipment, in recent years, a strong intelligent technology wind has been created. This year's exhibition Xinkaijia highlighted the EVA three-density sole machine. It is reported that the traditional similar products are mostly double-color, density soles are generally hand-bonded with glue, not only not environmentally friendly, but also prone to quality problems such as degumming. The new Kay Kay machine combines three different density and color EVA bottoms in advance, and the combination of three density sole materials is automatically realized by the machine's vulcanization and vacuuming machine. In the past two years, E-TPU sports shoes have been well received by the market, and due to its environmental protection, wear resistance, high shock resilience, antibacterial and breathable characteristics, the technical revolution of sports soles has been detonated. It is reported that the new Kaijia machine has developed this shoe machine in only 2 years. At present, this equipment can completely replace imported equipment, and it can be widely applied.

According to reports, the hydraulic automatic EVA injection foam molding machine is based on the research and development of the disc type sole machine and the TR sole machine. Its main performance characteristics are: touch-type human-computer interface, complete remote monitoring of the whole machine, fault diagnosis, automatic alarm, data visualization, easy operation; high-speed moving gun, high-speed electronic computer code to control injection displacement, rapid positioning and accurate shifting High-speed mold opening, using double-displacement pump large displacement oil circuit, can instantly accelerate mold opening. EVA injection foam molding machine in the research and development process, has three major characteristics: First, the prototyping time is short. This machine took three months to complete the survey, selecting the model, determining the overall design plan, and putting it into production at the exhibition. The second is the successful one-time debugging of the prototype. As the aircraft in the R & D process, the use of high-tech means to reduce the error rate and improve the accuracy. The third is that the aircraft is integrated with light, machine and electricity, and comprehensively uses advanced technologies from various disciplines.

On the afternoon of the 13th, at the press conference of the [Notice on the Economic Operation of Central Enterprises in the First Quarter of 2017" held by the State New Office, Shen Ying, chief accountant of the State-owned Assets Supervision and Administration Commission, said that the next step should be to accelerate the strategic restructuring of central enterprises and accelerate the steel and coal. , specialized in the integration of coal chemical industry. Earlier, the State-owned Assets Supervision and Administration Commission (SASAC) has repeatedly stated that the next step of restructuring will be to accelerate the integration of steel, coal and power businesses and explore the integration of overseas assets. In fact, the recent coal and energy central enterprises have indeed had more actions. Since the beginning of this year, China Shenhua (19.230, -0.06, -0.31%), which is the industry leader, has been exposed to a series of mergers and acquisitions activities, and is planning a larger-scale integration and restructuring, and its recent dividends and frequent personnel adjustments are Let this expectation heat up. Also due to personnel adjustments being interpreted as a prelude to mergers and acquisitions, there is another coal giant, China Coal Energy (6.160, -0.01, -0.16%) (601898.SH). We believe that the Shenhua Group's generous dividends will represent a new round of restructuring of central enterprises. It is recommended to pay attention to the coal enterprises in the central enterprises and the coal equipment enterprises in the central enterprises. According to the idea of central enterprises reforming the same industry, the central enterprises coal Enterprises are expected to benefit. At the same time, it is recommended to pay attention to coal companies with high performance, such as coal mines in Shaanxi.

The "2018 China Robot Welding Skills Competition" will be held at the Lanzhou Vocational and Technical College in Gansu from October 16 to 20, 2018. The competition aims to cultivate talents and motivate the skills of robot welding skills training, discover and select high-skilled talents, promote the construction of welding technology and automation majors and curriculum reforms, and improve the quality and competitiveness of welding high-skilled personnel. The technological progress of China's welding industry, enhance the technical exchanges between various industries, and make positive contributions to the rapid development of China's economic construction. The competition was hosted by China Welding Association, China Workers Welding Technology Association, American Welding Society, China Mechanical Engineering Society Welding Branch, Beijing University of Technology and Lanzhou University of Technology. Shandong Aotai Electric Co., Ltd., KUKA Robot (Shanghai) Co., Ltd. And Shanghai Kumao Robot Co., Ltd. (Robot Online) is the supporting unit, the China Welding Association Education and Training Working Committee, and Lanzhou Vocational and Technical College.

Safe green mining and clean and efficient use are the development direction of the world coal industry. As an important basic energy source and raw material for China, coal will not change its main energy status for a long period of time. We must conscientiously do a good job in coal. At present, China's economic and social development is at a new stage of historical development. The state has promoted the overall layout of the "five in one" and coordinated the promotion of the "four comprehensive" strategic layout, vigorously promoted the "energy revolution", and accelerated the pace of transformation and upgrading of the coal industry. The coal production and consumption methods will undergo profound changes, and new and higher requirements will be put forward for the equipment manufacturing industry. The future of coal machinery and equipment manufacturing is bright and promising. Founded in 2005, ChinaCoal & Mining Expo is a coal mining industry industry conference, attracting 380 exhibitors from 65 countries and regions, 38 of the world's top 500, professional audience 68987 The exhibition area is 68,000 square meters. It will be held in Beijing from November 21st to November 23rd, 2018. It has been successfully held for 13 sessions. Range of exhibition 1. Display of the image and new achievements of large-scale mining groups at home and abroad; display of investment projects in coal cities; display of the latest achievements in the development of coal mine equipment manufacturing; 2. Coal mine production equipment: coal mining machine Electric shovel bracket Scraper conveyor Mining vehicle Pump station Mining metallurgical equipment; 3. Roadway excavation and support: roadway excavation equipment rock drilling equipment roadway support material roadway support equipment (drilling machine and anchor rod, concrete jet machine); 4. Coal mine transportation equipment: underground transportation equipment, transportation equipment spare parts material storage, mining machine, shovel loader, rock loader, loader, scraper; 5. Coal mine safety and monitoring: safety production control system, safety monitoring system, mining large screen, underground communication equipment, wireless communication equipment. 6. Mining services: exploration and ventilation equipment, equipment repair and hydraulic tools, sealing and lubrication, wire rope and testing, compressor, coal mine design and research The application of computer in mining mine rescue mine cooling coal quality test coal mine combustible, toxic, harmful gas detection facilities; 7. Mining electromechanical equipment and materials: explosion-proof equipment, transformers and substations, various power equipment, generator sets, clutches, couplings, batteries, electric motors, reducers, air compressors, mining tires and mining accessories electronic scales Material mine lamp, mine power supply, downhole lighting equipment, mine safety material, mining pipe and chain mining cable bit and carbide equipment; 8. Beneficiation and powder processing equipment: crushing, screening and separation, cleaning, drying, pressure filtration, flotation, centrifugal, weighing equipment, testing and coal chemical equipment; 9. Coal mine emergency rescue equipment: mine escape self-rescue equipment rescue cabin refuge chamber personal protection transport training equipment.

2018 Guangzhou International Shoe & Footwear Leather Industry Exhibition, as a comprehensive and multi-angle business platform for shoe and shoe leather industry, will showcase various innovative technologies and products at the exhibition, leading the future design of leather shoes and shoes. Pazhou Poly World Trade Center, hundreds of exhibitors and tens of thousands of buyers gathered together to let technology change the pulse of the industry development, and jointly create the 2018 Guangzhou International Shoes Machinery Leather Industry Exhibition! Focus: International, diversified here As an important international shoe machine shoe leather industry exhibition, the exhibition site will focus on displaying thousands of new products in the whole industry, bringing international, professional and high-quality materials and products. Many exhibitors will provide visitors with a wide variety of local materials and technologies, making this Asia Pacific top shoe business platform exhibits. Professional visitors and exhibitors will gather together to search for product information and cooperation opportunities related to machinery, leather, accessories, chemicals, etc. At this exhibition, many international leading production technologies will be unveiled at the exhibition, bringing exhibitors a complete intelligent automation system solution and vision from the "Made in China" to "China Zhizhi" Internet + industry transformation and upgrading. Shocked. Various automation application technologies will also become the highlights of the exhibition, and lead the exhibitors to appreciate the future technology charm! This 2018 Guangzhou International Shoes Machine Shoes Leather Industry Exhibition will become an industry and information exchange event not to be missed.

Plastics have created a better life for human beings, and the speed of consumption upgrades is also pushing for the upgrading of plastics manufacturing. Guided by user needs, CHINAPLAS 2017 is in line with the market upgrade and the high-precision demand of downstream high-end buyers. It gathers three hotspots of [smart manufacturing, high-tech materials, and environmental protection technology" as the main line, which will run through the electronics. Showcases the world's leading solutions for rubber and plastics machinery, materials and technology at every stage of the different application industries and product lifecycles, automotive, packaging, construction, medical, etc. CHINAPLAS is not only a communication platform for procurement and technology, but also gradually evolved into a high-tech, high-value, high-level exhibition. CHINAPLAS 2017 will continue to enhance the technological content of exhibits, closely following the practical requirements of today's manufacturing companies for upgrading and transformation, including innovation, automation, precision, safety, energy efficiency, and cost reduction, thereby enhancing product versatility and added value and creating high efficiency. To cope with global competition and promote sustainable development of enterprises. SCOPE OF EXHIBITS Auxiliary equipment, blow molding machines, chemicals and raw materials, auxiliary materials, additives, pigments and masterbatches, composite and specialty materials, extruders and extrusion lines, film technology, industrial automation, injection molding machines, finishing, decoration, printing and printing Machinery and equipment, foam, reaction or reinforced resin machinery, pre-processing, recycling machinery and equipment, measuring, control and testing equipment, molds, other processing, post-processing machinery, parts, presses, welding machines, semi-finished Products and so on.

The robot industry has been called "the jewel in the crown of manufacturing" by General Secretary Xi, and has risen to the national strategy. Premier Li Keqiang repeatedly pointed out that "robot is an important indicator to measure the level of modern science and technology and high-end manufacturing, and is also a strategic field to seize the opportunities for the development of intelligent society." China's smart manufacturing transformation accelerates the robot industry to create a new pattern Robots are developing rapidly, and robotics companies are beginning to reform and innovate in all directions to adapt to the development of today's industrial society.The changes from the micro level of the enterprise to the macro level of the whole society have a profound impact on Chinese enterprises. It urges enterprises to start from improving machinery and equipment, increase the intensity of technology and capital, and minimize the amount of labor to deal with this change.Focus on robots, paying attention to the huge role played by robots in reducing labor costs, reducing labor risks, and improving product quality. National policy is expected to be intensive China's industrial robot industry has broad prospects for future development, and its application fields will also expand from the major industries such as automobiles and electronics to food and beverage, biomedicine, and logistics. Therefore, the state attaches importance to the development of the robot industry. In the planning of the new era, the level of manufacturing and application of robots is clarified, representing the manufacturing level of a country. The widespread use of robots is an important means and means for China to move from a manufacturing power to a manufacturing power. It is pointed out that the industrial robot industry will be given key support. Range of exhibition Industrial robot Service robot